Wednesday, November 23, 2011

How to Fix Red Ring of Death in Lower than 60 Minutes

By Jamie Jones


The red ring of death is a common problem affecting Xbox 360s worldwide. In fact, you can find thousands, if not millions of articles written about the topic all over the internet. In order to know how to fix red ring of death issue, one has to know its root cause.

The main culprit that causes the red ring of death is hardware design flaws. A gaming console is a fundamentally a high performance PC that has been customized and designed specifically for gaming. The components have been packed into a confined space with very little ventilation. As we most us of know, high performance components can generate lots of heat. The lack of ventilation and small heat sinks is a recipe for disaster.

The processor and graphical chip powering console are the components generate the excessive amount heat. Long term heat exposure heat will result in permanent damage and kill your console without warning. The solder on the motherboard can brittle form hairline cracks and if left unchecked, this can mess up the electrical flow of the console. The red ring of death is generally a caused by faulty hardware. However, it can be fixed within minutes with the right information. Absolutely no experience or expertise is necessary to figure out how to fix red ring of death issue in a mere minutes.

The ring of death involves three red lights around the power button lighting up. This error means that your console has general hardware malfunction. First, check if the power supply light is green. Otherwise, you have a malfunctioning power supply.

Next, unplug the power supply and connect it to a different power source. Make sure that everything is properly connected and turn the console on. You can also check if the there is anything that could cause the power supply to overheat. If the rings changed from three to two red lights immediately after troubleshooting your Xbox 360, wait for it to cool off a bit.

Once the console cools down and you're still getting the same error code, the next thing to do is disassemble Xbox 360 console itself and check its internal components. Note that dismantling the unit can void the warranty. It is best to send the device back if it is still covered by the warranty,

Dismantling the Xbox 360 case is very easy. You can simply poke the locks out using a screw driver and pull the bezel off. Once it is off, you can then remove the DVD, unscrew the metal base and carefully remove the motherboard.

The two clamps on the back motherboard can be removed by unscrewing them from the back and let you remove the heat sinks. The processor and graphical chip are ones located directly the heat sinks. You can then remove the thermal compound off and spread a new layer of coating. Thermal pastes or compounds designed for desktop computers are perfect for the Xbox 360. These are available in any major computer store. Speared and evenly apply thermal compound, assemble the Xbox 360 back again and turn it back on. Learning how to fix red ring of death error is something any Xbox 360 owner should learn.

If you are a bit hesitant about opening up the console yourself, there are videos and instructions on the internet about how to fix red ring of death. Repairing the Xbox 360 console yourself will save you a lot of money and it will only take a few minutes.




About the Author:



No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...